{"heroContent":"The Husqvarna 14527E (model 96193007500) is a robust gas-powered two-stage snow blower popular with homeowners for its blend of power and ease of use. Typically manufactured in the late 2000s and early 2010s, this model boasts a 27-inch clearing width, making it suitable for medium to large driveways and walkways. Its two-stage design efficiently handles heavier snowfalls.","heroImage":null,"expandedContent":"The Husqvarna 14527E, specifically model number 96193007500, was a popular choice for homeowners during its production run. This two-stage snow blower is powered by a Briggs & Stratton engine, typically around 14.5 ft-lbs gross torque (approximately 9-10 HP), providing ample power for tackling significant snow accumulations. Many models featured an electric start option for added convenience in cold weather. The two-stage design utilizes an auger system to break up the snow and then an impeller to forcefully discharge it through the chute. The 14527E offers a 27-inch clearing width and an intake height of around 20-23 inches, enabling it to handle substantial snowfall. Snow throwing distance can reach up to 40 feet, depending on snow conditions. This model features a wheel-driven system with multiple forward and reverse speeds, offering good maneuverability. The chute is typically controlled manually, allowing the operator to direct the snow stream. A headlight is included for enhanced visibility during early morning or evening snow removal. Heated grips are typically not a feature on this model. The Husqvarna 14527E is well-suited for residential use in areas with moderate to heavy snowfall and is capable of clearing paved surfaces like driveways and sidewalks effectively.","specifications":"

Engine	Briggs & Stratton 14.5 ft-lbs Gross Torque, Electric Start Available
Stage Type	Two-Stage
Clearing Width	27 inches
Intake Height	23 inches
Throwing Distance	Up to 40 ft
Drive System	Wheel - 6 Forward/2 Reverse
Fuel Tank	3 gallons
Weight	Approximately 250 lbs
Years Produced	Late 2000s - Early 2010s

","history":"The Husqvarna 14527E was introduced to provide homeowners with a powerful and reliable snow removal solution. While specific production dates may vary, it was a prominent model in the Husqvarna lineup for several years. It offered a good balance of features and performance, making it a popular choice for those needing a robust snow blower.","maintenanceTips":"

Regularly inspect the auger blades and impeller for damage and wear. Replace worn or damaged components to maintain optimal performance.
Always use the correct shear pins for your Husqvarna 14527E. Replace broken shear pins immediately to prevent damage to the auger gearbox.
Check the belt tension periodically and adjust as needed. Loose or worn belts can reduce throwing distance and overall performance.
Change the engine oil according to the manufacturer's recommendations (typically after every 25 hours of use or annually). Use fuel stabilizer when storing the snow blower for the off-season to prevent fuel degradation. Adjust skid shoes so the scraper bar doesn't make excessive contact with the ground.

","faqItems":[{"question":"What engine is in the Husqvarna 14527E 96193007500?","answer":"The Husqvarna 14527E 96193007500 is typically powered by a Briggs & Stratton engine with a gross torque rating of 14.5 ft-lbs, which translates to roughly 9-10 horsepower. An electric start option was available on many models for easier starting in cold conditions."},{"question":"What is the clearing width of the 14527E 96193007500?","answer":"The Husqvarna 14527E 96193007500 has a clearing width of 27 inches and an intake height of approximately 23 inches, allowing it to handle significant snow accumulations."},{"question":"Is the 14527E 96193007500 a single-stage or two-stage snow blower?","answer":"The Husqvarna 14527E 96193007500 is a two-stage snow blower. It utilizes an auger to break up and collect the snow, and then an impeller to forcefully discharge the snow through the chute. This design is more effective for handling heavier, wetter snow compared to single-stage models."},{"question":"What are common parts needed for the 14527E 96193007500?","answer":"Common replacement parts for the Husqvarna 14527E 96193007500 include shear pins (for the auger), drive belts, auger paddles (if equipped), the scraper bar, skid shoes, spark plugs, and fuel filters. Regular maintenance and timely replacement of these parts will help ensure optimal performance and longevity of your snow blower."}]}

14527e 96193007500

179092 - Belt, Traction Drive