{"heroContent":"The John Deere X130R DECK 42 RH riding mower, part of the X100 series, was designed for efficient lawn care in residential settings. It is known for its rear discharge design with a 42-inch deck. This model typically features a reliable single-cylinder engine and an easy-to-use hydrostatic transmission making it popular for homeowners with smaller to medium-sized yards.","heroImage":null,"expandedContent":"The John Deere X130R, part of the X100 series, offered a blend of value and performance for residential lawn care. While the exact introduction year is not definitively known for this specific configuration, it falls within the production timeframe of the X100 series, which offered models from the mid-2000s onward. This configuration specifically features a 42-inch rear discharge mower deck (DECK 42 RH). Typically, X130R models are powered by a single-cylinder engine, often a Briggs & Stratton or Kawasaki, producing around 10-13 horsepower. Engine displacement usually falls between 344cc and 500cc depending on the exact specification. The transmission is typically a hydrostatic transmission, offering smooth, pedal-controlled operation. The X130R's key features include its rear discharge design, eliminating the need for a side discharge chute and allowing for trimming on both sides. It is well-suited for residential lawns and smaller properties, distinguishing itself from larger, more robust models in the John Deere lineup designed for commercial or acreage use.","specifications":"

Engine	Briggs & Stratton/Kawasaki 10-13 HP 344-500cc Single-Cylinder
Transmission	Hydrostatic
Deck Size	42 inches
Ground Speed	5.5 mph
Fuel Capacity	2.4 gallons
Weight	450 lbs (approximate)
Years Produced	Varies by year

","history":"The John Deere X130R DECK 42 RH is a configuration of the X130, which is part of the broader X100 series known for its entry-level riding mowers designed for residential use. These models offered a balance of affordability and performance for homeowners. The 42 RH specifically refers to the 42-inch rear discharge mower deck design.","maintenanceTips":"

Belt Replacement: Inspect mower deck and drive belts annually, replacing them every 2-3 years or sooner if you notice cracking, fraying, or slippage.
Blade Sharpening: Sharpen your mower blades at least twice a season, or more often if you frequently mow over rough terrain, to ensure a clean cut and healthy lawn.
Filter Changes: Replace the engine oil and air filter annually, or every 50 hours of use, to maintain optimal engine performance and longevity.

","faqItems":[{"question":"What size deck does the John Deere X130R DECK 42 RH have?","answer":"The John Deere X130R DECK 42 RH is equipped with a 42-inch rear discharge mower deck."},{"question":"What engine is in the John Deere X130R DECK 42 RH?","answer":"The John Deere X130R DECK 42 RH typically features a single-cylinder engine, often a Briggs & Stratton or Kawasaki, producing approximately 10-13 horsepower."},{"question":"What belt do I need for my John Deere X130R DECK 42 RH?","answer":"You will need both a deck belt and a drive belt. Consult your owner's manual for the specific part numbers or measure the existing belts to find the correct size replacement. Common deck belt sizes are around 95-100 inches and drive belts are around 50-60 inches, but verify your specific model's requirements."},{"question":"What blades fit the John Deere X130R DECK 42 RH?","answer":"The John Deere X130R DECK 42 RH uses two 21-inch blades for its 42-inch deck. Ensure you purchase blades specifically designed for John Deere 42-inch mower decks. Check your owner's manual for OEM part numbers."}]}

X130R (Deck 42" RH)

GX23111 - JOHN DEERE