{"heroContent":"The John Deere 32 snow thrower, produced in the late 1980s and early 1990s, is a gas-powered, two-stage machine known for its durability and solid performance. With a 32-inch clearing width, it was a popular choice for homeowners needing to tackle moderate to heavy snowfall on driveways and sidewalks. Its robust construction made it a reliable option for years of dependable snow removal.","heroImage":null,"expandedContent":"The John Deere 32 snow thrower was a mainstay in John Deere's lineup during the late 1980s and early 1990s, offering a blend of power and maneuverability for residential snow removal. It was equipped with a Tecumseh engine, typically ranging from 8 to 10 horsepower, providing ample power to handle heavy, wet snow. Some models featured an optional electric start for easier starting in cold weather. Being a two-stage snow thrower, it utilizes an auger to break up and collect the snow, and then an impeller to forcefully discharge it through the chute. The John Deere 32 boasts a 32-inch clearing width and an intake height of around 20-21 inches, enabling it to clear a substantial path in a single pass. The throwing distance could reach up to 30-40 feet, depending on the snow conditions. The machine utilizes a wheel-drive system, offering multiple forward and reverse speeds, allowing users to adjust the pace to the snow's depth and consistency. Chute control is typically manual, allowing for precise direction of the snow discharge. While it didn't feature heated grips or a headlight in its standard configuration, its powerful engine and robust construction made it well-suited for tackling a variety of snow conditions in residential and light commercial settings.","specifications":"

Engine	Tecumseh 8-10 HP (Electric Start Optional)
Stage Type	Two-Stage
Clearing Width	32 inches
Intake Height	21 inches
Throwing Distance	Up to 40 ft
Drive System	Wheel - 5 Forward/2 Reverse
Fuel Tank	1.5 gallons
Weight	Approximately 250 lbs
Years Produced	Late 1980s - Early 1990s

","history":"The John Deere 32 snow thrower was introduced in the late 1980s as a mid-sized option in their snow removal equipment lineup. It filled a gap between smaller, single-stage models and larger, more powerful machines. While the design remained relatively consistent throughout its production run, it became a respected and reliable option for homeowners in snowy climates.","maintenanceTips":"

Regularly inspect the auger and impeller for any signs of damage or wear. Replace worn paddles or repair any bent auger flights to maintain optimal performance.
Always use the correct shear pins and keep spares on hand. Replace broken shear pins immediately to prevent damage to the auger gearbox.
Check belt tension periodically and adjust as needed. Loose belts can lead to reduced throwing distance and increased wear.
Use fuel stabilizer in the off-season to prevent fuel degradation and carburetor issues. Change the engine oil annually for optimal engine health.

","faqItems":[{"question":"What engine is in the John Deere 32?","answer":"The John Deere 32 is typically powered by a Tecumseh engine ranging from 8 to 10 horsepower. Some models were available with an optional electric start for easier cold-weather starting."},{"question":"What is the clearing width of the 32?","answer":"The John Deere 32 has a clearing width of 32 inches, allowing it to clear a substantial path in one pass. The intake height is approximately 21 inches."},{"question":"Is the 32 a single-stage or two-stage snow blower?","answer":"The John Deere 32 is a two-stage snow blower. This means it uses an auger to collect and break up the snow, and then an impeller to forcefully throw the snow through the discharge chute."},{"question":"What are common parts needed for the 32?","answer":"Common parts needed for the John Deere 32 include shear pins, belts (auger and drive), auger paddles, scraper bar, skid shoes, spark plugs, and fuel filters. Regular replacement of these wear items will keep your machine running smoothly."}]}

32

M41668 - JOHN DEERE