{"heroContent":"The Murray 1695520 - 18-2816-89 snow blower, designed for both residential and light commercial use, was a popular model known for its reliability. Typically manufactured in the late 1990s and early 2000s, it was usually powered by a gas engine and offered a clearing width suitable for average-sized driveways and walkways. This two-stage model was a workhorse for snow removal.","heroImage":null,"expandedContent":"The Murray 1695520 - 18-2816-89 snow thrower was a common sight in suburban driveways during the late 1990s and early 2000s. While specific engine specifications could vary, it commonly featured a Briggs & Stratton or Tecumseh engine in the 5-8 HP range, often with an optional electric start for easier operation in cold weather. Being a two-stage snow blower, it utilized an auger system to break up the snow and an impeller to throw it. The typical clearing width was around 26 inches, with an intake height of approximately 20 inches, allowing it to handle moderate snowfalls. Throwing distance ranged from 20-30 feet, depending on snow conditions. These models featured a wheel drive system with multiple forward and reverse speeds. The chute rotation was typically manually controlled, allowing users to direct the snow stream. A headlight was often included for improved visibility during early morning or evening snow removal. While heated grips were not a standard feature on this model, the Murray 1695520 - 18-2816-89 was best suited for clearing driveways, sidewalks, and patios with moderate snowfall accumulations. Avoid using on gravel surfaces as this can damage the machine.","specifications":"

Engine	Briggs & Stratton/Tecumseh 5-8 HP Electric Start (Optional)
Stage Type	Two-Stage
Clearing Width	26 inches
Intake Height	20 inches
Throwing Distance	Up to 30 ft
Drive System	Wheel - Multiple Forward/Reverse
Fuel Tank	1.5 Gallons
Weight	Approx. 175 Lbs
Years Produced	Late 1990s - Early 2000s

","history":"The Murray 1695520 - 18-2816-89 was a popular two-stage snow blower introduced in the late 1990s as part of Murray's residential snow removal lineup. It provided a reliable and affordable option for homeowners needing more power than a single-stage machine. While there weren't major redesigns during its production run, component improvements were likely implemented over the years.","maintenanceTips":"

Inspect Auger and Impeller: Regularly check the auger blades and impeller for damage or wear. Replace worn or damaged parts promptly to maintain optimal performance.
Shear Pin Replacement: Always have spare shear pins on hand. Replace broken shear pins immediately to protect the auger gearbox from damage. Use only the correct shear pins specified for your model.
Oil Changes and Fuel Stabilizer: Change the engine oil annually, following the manufacturer's recommendations. Add fuel stabilizer to the gasoline before storing the snow blower for the off-season to prevent fuel degradation and carburetor issues.
Skid Shoe Adjustment: Adjust the skid shoes to the correct height for your surface to prevent damage to the scraper bar and auger housing, especially when clearing gravel or uneven surfaces.

","faqItems":[{"question":"What engine is in the Murray 1695520 - 18-2816-89?","answer":"The Murray 1695520 - 18-2816-89 typically used a Briggs & Stratton or Tecumseh engine in the 5-8 HP range. Some models were equipped with an electric start feature."},{"question":"What is the clearing width of the 1695520 - 18-2816-89?","answer":"The Murray 1695520 - 18-2816-89 has a clearing width of approximately 26 inches and an intake height of around 20 inches."},{"question":"Is the 1695520 - 18-2816-89 a single-stage or two-stage snow blower?","answer":"The Murray 1695520 - 18-2816-89 is a two-stage snow blower. It uses an auger to gather and break up the snow, and then an impeller to throw the snow through the discharge chute."},{"question":"What are common parts needed for the 1695520 - 18-2816-89?","answer":"Common wear parts for the Murray 1695520 - 18-2816-89 include shear pins, belts (auger and drive), auger paddles, scraper bar, skid shoes, spark plugs, and fuel filters."}]}

1695520 - 18-2816-89

A39K - Aramid Blue V-Belt (1/2" X 41" )