{"heroContent":"The Murray 1695537 - 650/21 is a robust gas-powered two-stage snow blower, likely manufactured in the late 1990s and early 2000s. Featuring a considerable clearing width, it was a popular choice for homeowners seeking reliable performance in moderate to heavy snowfall. Its combination of power and user-friendly design made it a dependable machine for residential snow removal.","heroImage":null,"expandedContent":"The Murray 1695537 - 650/21 snow blower was a common model intended for both homeowners and commercial users facing moderate to heavy snowfalls. While the exact production years can vary, it was primarily available in the late 1990s and early 2000s. It typically featured a Briggs & Stratton or Tecumseh engine, ranging from 6 to 8 horsepower and around 205cc to 250cc, depending on the specific year and sub-model. Some versions may have included an optional electric start for easier starting in cold weather. This model is a two-stage snow blower utilizing a robust auger system to break up snow and ice, followed by an impeller that throws the snow. The clearing width is approximately 21 inches, with an intake height around 16-20 inches. Throwing distances can reach up to 25-30 feet under optimal conditions. The drive system is wheel-driven, typically with multiple forward speeds (usually 4-6) and reverse speeds (usually 2). Chute controls are typically manual, allowing the operator to adjust the direction and angle of the snow stream. While not always standard, some models were equipped with a headlight for improved visibility during nighttime operation. Heated grips were not a common feature on this specific model. Ideal for use in areas with moderate to heavy snowfall on driveways, sidewalks, and walkways.","specifications":"

Engine	Briggs & Stratton/Tecumseh 6-8 HP (205-250cc) Electric Start (Optional)
Stage Type	Two-Stage
Clearing Width	21 inches
Intake Height	16-20 inches
Throwing Distance	Up to 30 ft
Drive System	Wheel - 4-6 Forward / 2 Reverse
Fuel Tank	1.5 gallons
Weight	150 lbs
Years Produced	Late 1990s - Early 2000s

","history":"The Murray 1695537 - 650/21 was introduced as a reliable and affordable option in the competitive two-stage snow blower market. While it didn't undergo any major redesigns during its production run, minor improvements may have been implemented over the years. It became a popular choice for homeowners due to its blend of power, ease of use, and reasonable price point.","maintenanceTips":"

Inspect Auger and Impeller: Regularly check the auger blades and impeller for damage or wear. Replace worn or damaged parts to maintain optimal performance.
Check and Replace Shear Pins: Shear pins protect the auger gearbox. Inspect them regularly and replace any that are broken or damaged to prevent costly repairs.
Fuel Stabilizer: Add fuel stabilizer to the gasoline before storing the snow blower for the off-season to prevent fuel degradation and carburetor issues.

","faqItems":[{"question":"What engine is in the Murray 1695537 - 650/21?","answer":"The Murray 1695537 - 650/21 typically uses a Briggs & Stratton or Tecumseh engine, ranging from 6 to 8 horsepower (approximately 205cc to 250cc). Some models offered an electric start option."},{"question":"What is the clearing width of the 1695537 - 650/21?","answer":"The clearing width of the Murray 1695537 - 650/21 is 21 inches. The intake height is approximately 16-20 inches."},{"question":"Is the 1695537 - 650/21 a single-stage or two-stage snow blower?","answer":"The Murray 1695537 - 650/21 is a two-stage snow blower. It uses an auger to break up the snow and then an impeller to throw the snow away from the machine."},{"question":"What are common parts needed for the 1695537 - 650/21?","answer":"Common wear parts for the Murray 1695537 - 650/21 include shear pins, drive belts, auger belts, auger paddles, scraper bar, skid shoes, spark plugs, and fuel filters."}]}

1695537 - 650/21

A39K - Aramid Blue V-Belt (1/2" X 41" )